No. 3(79) (2023): Modern technologies. System analysis. Modeling

Machine Building and Theoretical Engineering

The effect of the «jamming» of the pendulum on the rotating shaft of the mechanical system and its analogues

Anatolii Ivanovich Artyunin, Oleg Yur'evich Sumenkov

10-21
- Текст статьи (стр. 10-21) (Русский)
Determining the level of residual stresses by computer simulation in turning heat-resistant materials

Liliya Rimovna Kil’metova

22-33
- Текст статьи (стр. 22-33) (Русский)
The use of axial stops and polymer dynamic load absorbers in gates with thin-walled seals

Yurii Igorevich Belogolov

34-42
- Текст статьи (стр. 34-42) (Русский)

Transport

Modeling modes of a traction power supply system using transformers with windings connected into an open triangle

Andrei Vasil'evich Kryukov, Alexander Valer'evich Cherepanov, Дмитрий Александрович Seredkin, Il'ya Anatol'evich Fesak

44-57
- Текст статьи (стр. 44-57) (Русский)
Mathematical model of an induction machine with consideration of saturation and heating

Anton Eduardovich Biryukov, Dmitrii Gennad'evich Sorokin

58-76
- Текст статьи (стр. 58-76) (Русский)
Transport and logistics services and services of JSC «Russian Railways», their perception in the transport market and the main directions of development

Victoriya Alexandrovna Olentsevich, Natal'ya Vasil'evna Vlasova

77-86
- Текст статьи (стр. 77-86) (Русский)
Prerequisites for changing the traffic pattern at the terminal

Diana Yur'evna Grishkova

87-96
- Текст статьи (стр. 87-96) (Русский)
The non-uniform elasticity of the railway track and its considering in mathematical models of rolling stock of JSC «Russian Railways»

Victor Alexeevich Nekhaev, Elena Gennad'evna Leonenko

97-111
- Текст статьи (стр. 97-111) (Русский)
Development of technical solutions to reduce the distortion of the sinusoidal voltage curve of overhead lines supplying automatic blocking devices

Il’ya Sergeevich Ovechkin, Elena Yurievna Puzina

112-123
- Текст статьи (стр. 112-123) (Русский)
Increasing the regulation quality of asynchronous induction motors with modal control

Yurii Mikhailovich Kulinich, Dmitrii Alekseevich Starodubtsev

124-134
- Текст статьи (стр. 124-134) (Русский)
Evaluation of the effectiveness of thermal insulation materials by conducting thermal forecast calcu-lations

Dmitrii Alexanndrovich Koven'kin, Dmitrii Olegovich Tumanov, Nikolai Dmitrievich Shavanov

135-145
- Текст статьи (стр. 135-145) (Русский)
Analysis of the influence of the locomotive sand systems’ technical condition upon the number of unplanned repairs of traction rolling stock and ways to improve their design

Sergei Victorovich Treskin, Evgenii Yur'evich Dul’skii, Anton Victorovich Romashov

146-158
- Текст статьи (стр. 146-158) (Русский)
Forecasting the number of freight wagons failures during the overhaul period based on statistical assessment

Tat’yana Vladimirovna Ivanova, Vladimir Alexandrovich Rudakov, Inna Vladimirovna Kovrigina

159-170
- Текст статьи (стр. 159-170) (Русский)

Information technology, management and processing

Simulation of the cumulation process to determine the thickness and deflection of the segmental cladding of the perforator charge, providing maximum penetration depth

Evgeny Vitalievich Mukhutdinov, Zul’phiya Rashidovna Vakhidova, Maksim Gennad'evich Efimov

172-180
- Текст статьи (стр. 172-180) (Русский)
Determination of hydraulic characteristics of pipeline fittings using finite element analysis

Vadim Andreevich Budanov, Nikolai Victorovich Petrov, Shodmon Salokhidin Nozirzoda, Ekaterina Dmitrievna Petrova

181-189
- Текст статьи (стр. 181-189) (Русский)

Full Issue

Machine Building and Theoretical Engineering

The effect of the «jamming» of the pendulum on the rotating shaft of the mechanical system and its analogues

Determining the level of residual stresses by computer simulation in turning heat-resistant materials

The use of axial stops and polymer dynamic load absorbers in gates with thin-walled seals

Transport

Modeling modes of a traction power supply system using transformers with windings connected into an open triangle

Mathematical model of an induction machine with consideration of saturation and heating

Transport and logistics services and services of JSC «Russian Railways», their perception in the transport market and the main directions of development

Prerequisites for changing the traffic pattern at the terminal

The non-uniform elasticity of the railway track and its considering in mathematical models of rolling stock of JSC «Russian Railways»

Development of technical solutions to reduce the distortion of the sinusoidal voltage curve of overhead lines supplying automatic blocking devices

Increasing the regulation quality of asynchronous induction motors with modal control

Evaluation of the effectiveness of thermal insulation materials by conducting thermal forecast calcu-lations

Analysis of the influence of the locomotive sand systems’ technical condition upon the number of unplanned repairs of traction rolling stock and ways to improve their design

Forecasting the number of freight wagons failures during the overhaul period based on statistical assessment

Information technology, management and processing

Simulation of the cumulation process to determine the thickness and deflection of the segmental cladding of the perforator charge, providing maximum penetration depth

Determination of hydraulic characteristics of pipeline fittings using finite element analysis

Language

Information

Make a Submission